AIX的安装与使用（初级）二

三 初始设置
当系统成功安装后，会出现初始化设置对话框，这里建议设定以下几个选项：
1 时间：可选
2 密码：必选，并注意密码复杂度尽量大点(设定后你才可登录系统)
3 TCP/IP： 必选（设定后，你可以通过telnet或ftp在远程访问操作）
hostname:kscvicseaix,这个要求不能与已经存在的重复，可以以“地区+公司名+aix”形式;
Ip:192.168.128.19；
Subnet mask: 255.255.255.0，这个记得填写啊，否则会报错的;
Netwrok interface: en0 01-10 Standard Ethernet Network Interface；
IP address of the name server : 221.6.4.67,这个与windows下的DNS是相同的；
Domain name: ks.cvicse.com，这个我认为没有太大要求
Default gateway address: 192.168.128.200
可参考IBM官方WIKI：http://www-941.ibm.com/collaboration/wiki/display/WikiPtype/Setup+Options
----------------------------------------------------------------------------------
Third initial setup
When you succeed to install the operating system, there will show a dialog box about initial setup. Here i suggest you finish those setups:
1 time:optional
2 password:must,and you should set the password more complex(you can login until you finish this);
3 TCP/IP:must(after finish this, you can operate the system at remote client by telnet or ftp)
hostname:kscvicseaix,the host name must be only,so you can call it by 'local'+' company's name'+ aix;
Ip:192.168.128.19；
Subnet mask: 255.255.255.0，you should fill this otherwise there will report error;
Netwrok interface: en0 01-10 Standard Ethernet Network Interface；
IP address of the name server : 221.6.4.67,familiar with the DNS of windows；
Domain name: ks.cvicse.com，i think this don't have specific request
Default gateway address: 192.168.128.200
you can visit the site of IBM official WIKI: http://www-941.ibm.com/collaboration/wiki/display/WikiPtype/Setup+Options